Professional School CCTV Installation – Your #1 Choice in Delhi NCR

Impact by Honeywell 5MP White Plastic AHD IR Dome Camera, I-HADC-5005PI-L

Wbox 5MP 3.6mm Plastic Fixed Lens AHD IR Dome Camera, WBC0ECVHD5R2FPN

Hikvision 2MP PIR Analog Dome Camera, DS-2CE5AD0T-PIR

D-Link 2MP 3.6mm Plastic Full HD 1080p Day & Night Fixed Dome Camera, IR: 20 m, DCS-F1612

Securus 3MP 2304x1296p Aluminium & ABS Dome Camera, SS-NC15DXLP-CSUTL-M3(S)

Godrej SeeThru 2MP HD Infrared CCTV Camera, GODREJ2MP1DOME

Follow these steps to resolve the issue:

• 1Verify power to the camera – LED should be steady; if off, check the AC adapter and try a spare power supply.
• 2Inspect the BNC or RJ45 cable for breaks or loose connectors – replace if any damage is seen.
• 3Test the camera on a different channel of the DVR/NVR to rule out channel mis‑assignment.
• 4Check the channel’s video format in the DVR/NVR menu (AHD/TVI/CVI). Switch to the camera’s native format if mismatched.
• 5If the camera is IP, confirm the network link via LED status or ping the camera’s IP address.

Follow these steps to resolve the issue:

• 1Open the HDD status screen and look for warnings such as ‘SMART error’ or ‘disk failure’. Replace the HDD if needed.
• 2Confirm the recording schedule is set to 24/7 or to the selected motion‑detector zones.
• 3Ensure the HDD has at least 10% free space; if full, delete older footage or expand storage.
• 4Review motion‑detection sensitivity; set it to medium if the camera is too sensitive and generating false triggers.
• 5If the HDD shows corruption, perform a ‘re‑format’ from the DVR menu – remember this will erase all data.

Follow these steps to resolve the issue:

• 1Update the mobile app (Hik-Connect, DMSS, or equivalent) to the latest version from the Play Store.
• 2Ping the DVR/NVR from a laptop to ensure it has internet connectivity; if not, check the router or ISP.
• 3Verify the P2P or cloud connection status in the device’s network settings; enable if disabled.
• 4Delete the device from the app, reboot the DVR/NVR, and re‑add using the QR code or device ID.
• 5If a static IP is required, set up port forwarding (port 80/443) via the router and test again.

Follow these steps to resolve the issue:

• 1Clean the camera lens dome with a soft microfiber cloth to remove dust or smudges.
• 2Check that the IR cut filter is switching correctly at dusk; you should see the filter slide out automatically.
• 3Inspect the IR LEDs – if they are dim or off, replace the camera or the LED module.
• 4Reposition the camera to avoid IR reflections from white walls or metallic surfaces.
• 5If the camera still fails, replace the unit with a newer model that has improved IR illumination.