Professional Basement CCTV Camera – Your #1 Choice in Delhi NCR

Impact by Honeywell 5MP White Plastic AHD IR Dome Camera, I-HADC-5005PI-L

Wbox 5MP 3.6mm Plastic Fixed Lens AHD IR Dome Camera, WBC0ECVHD5R2FPN

Hikvision 2MP PIR Analog Dome Camera, DS-2CE5AD0T-PIR

D-Link 2MP 3.6mm Plastic Full HD 1080p Day & Night Fixed Dome Camera, IR: 20 m, DCS-F1612

Securus 3MP 2304x1296p Aluminium & ABS Dome Camera, SS-NC15DXLP-CSUTL-M3(S)

Godrej SeeThru 2MP HD Infrared CCTV Camera, GODREJ2MP1DOME

Follow these steps to resolve the issue:

• 1Check power supply to camera (LED indicator) – ensure no water ingress in basement outlets.
• 2Verify BNC/RJ45 cable connections at camera and DVR/NVR – inspect for corrosion or moisture damage.
• 3Test camera independently on a known‑working channel – use a spare camera if available.
• 4Check DVR channel settings for correct video format (AHD/TVI/CVI) – mismatched codecs can block signal.
• 5Replace cable if signal test shows low voltage or intermittent connection, especially if cable runs through damp walls.

Follow these steps to resolve the issue:

• 1Check HDD health status in DVR menu → Storage Management – look for error messages or SMART warnings.
• 2Verify recording schedule is set to 24/7 or motion‑based – ensure time zone is correct for basement clock.
• 3Ensure HDD has sufficient free space (>10% minimum) – basements often have limited space for storage upgrades.
• 4Check motion detection sensitivity settings – high sensitivity can overload the system in a dark basement.
• 5Re‑initialize HDD if corrupted (note: data loss) – backup any critical footage before reformat.

Follow these steps to resolve the issue:

• 1Ensure mobile app (Hik‑Connect/DMSS) is updated to latest version – older builds may not support new firmware.
• 2Verify DVR/NVR is connected to internet (ping test) – basement routers may need a dedicated line for stability.
• 3Check P2P/cloud connection status in device network settings – confirm port forwarding or DDNS is active if using a static IP.
• 4Re‑add device to app using QR code scan – re‑pair any lost network credentials.
• 5Contact ISP if port forwarding is required for static IP setup – basement setups often use municipal broadband or fiber.

Follow these steps to resolve the issue:

• 1Clean camera lens dome with soft microfiber cloth – dust can accumulate faster in basement humidity.
• 2Check IR cut filter operation (should switch at dusk/dawn) – a faulty filter can block IR illumination.
• 3Verify IR illuminator LEDs are working – replace LEDs if any are dim or missing.
• 4Adjust camera position to avoid IR reflection from walls or water‑logged surfaces.
• 5Replace camera if IR LEDs are physically damaged – older models may fail under prolonged low‑light conditions.