Professional 16 Channel NVR Setup – Your #1 Choice in Delhi NCR

Impact by Honeywell 5MP White Plastic AHD IR Dome Camera, I-HADC-5005PI-L

Wbox 5MP 3.6mm Plastic Fixed Lens AHD IR Dome Camera, WBC0ECVHD5R2FPN

Hikvision 2MP PIR Analog Dome Camera, DS-2CE5AD0T-PIR

D-Link 2MP 3.6mm Plastic Full HD 1080p Day & Night Fixed Dome Camera, IR: 20 m, DCS-F1612

Securus 3MP 2304x1296p Aluminium & ABS Dome Camera, SS-NC15DXLP-CSUTL-M3(S)

Godrej SeeThru 2MP HD Infrared CCTV Camera, GODREJ2MP1DOME

Follow these steps to resolve the issue:

• 1Verify that the camera power LED is solid green; if not, check the power cable and outlet.
• 2Confirm that the camera is correctly assigned to one of the 16 NVR channels in the web interface.
• 3Inspect the RJ45 or BNC cable for any kinks or disconnections at both camera and NVR ends.
• 4Check the camera’s resolution and frame‑rate settings to ensure they match the NVR’s supported formats (e.g., 1080p/30fps).
• 5Use the NVR’s live‑view on a different channel to rule out a faulty monitor.
• 6If the camera still shows no signal, replace the cable and test with a known‑good camera on that channel.

Follow these steps to resolve the issue:

• 1Open the NVR’s storage menu and confirm the HDD health status; a red indicator means a faulty drive.
• 2Navigate to the recording schedule page and ensure the selected 16 channels are set to 24/7 or motion‑based recording.
• 3Check the free space percentage; if below 10% free, delete old footage or add a larger HDD.
• 4Review the motion‑detection sensitivity for each channel to avoid false triggers that block continuous recording.
• 5If the HDD shows errors, re‑initialize it from the NVR menu (note: this will erase existing data).

Follow these steps to resolve the issue:

• 1Update the mobile app (e.g., Hik‑Connect, DMSS) to the latest version on the device.
• 2Ping the NVR’s public IP from a laptop; if unreachable, verify the ISP’s routing and firewall settings.
• 3In the NVR’s network settings, confirm that P2P or cloud service is enabled and the device is listed as ‘online’.
• 4Remove the device from the app and re‑add it using the QR‑code scan or manual device ID.
• 5If a static IP is required, set up port forwarding (TCP 80, 443, 8000) on the router and test connectivity.

Follow these steps to resolve the issue:

• 1Clean the camera lens dome with a soft microfiber cloth to remove dust or smudges.
• 2Check that the IR cut filter toggles automatically at dusk; if not, adjust the camera’s auto‑IR settings in the web interface.
• 3Verify that the IR LEDs around the camera housing emit light (a faint glow should be visible).
• 4Re‑position the camera to avoid reflecting IR light off bright walls or glass surfaces.
• 5If the LEDs fail to illuminate, replace the camera as the IR LEDs are typically not user‑replaceable.