Professional 360 Degree Camera – Your #1 Choice in Delhi NCR

Impact by Honeywell 5MP White Plastic AHD IR Dome Camera, I-HADC-5005PI-L

Wbox 5MP 3.6mm Plastic Fixed Lens AHD IR Dome Camera, WBC0ECVHD5R2FPN

Hikvision 2MP PIR Analog Dome Camera, DS-2CE5AD0T-PIR

D-Link 2MP 3.6mm Plastic Full HD 1080p Day & Night Fixed Dome Camera, IR: 20 m, DCS-F1612

Securus 3MP 2304x1296p Aluminium & ABS Dome Camera, SS-NC15DXLP-CSUTL-M3(S)

Godrej SeeThru 2MP HD Infrared CCTV Camera, GODREJ2MP1DOME

Follow these steps to resolve the issue:

• 1Verify that the 360 camera is receiving power (LED indicator on the camera housing).
• 2Check the PoE or Wi‑Fi connection: ensure the PoE injector or network switch is functioning and the Wi‑Fi SSID is visible.
• 3Confirm that the HDMI or USB output from the camera is correctly connected to the monitor or capture device.
• 4Test the camera on a known‑working channel or port to rule out channel corruption.
• 5If using PoE, replace the Ethernet cable if the signal strength is low or the cable shows physical damage.

Follow these steps to resolve the issue:

• 1Open the camera’s storage menu and check HDD health status; look for errors or SMART warnings.
• 2Verify that the recording schedule is set to 24/7 or motion‑based and that the 360 camera’s motion detection is enabled.
• 3Ensure the HDD has at least 10% free space; if storage is full, delete or archive older footage.
• 4Check the motion detection sensitivity; too high a threshold may prevent recording during low‑activity periods.
• 5If the HDD shows corruption, re‑initialize it (note: all existing footage will be lost).

Follow these steps to resolve the issue:

• 1Update the mobile app (e.g., Hik-Connect, DMSS, or the CamHarbor portal) to the latest version.
• 2Confirm that the 360 camera is online by pinging the device’s IP address from a laptop on the same network.
• 3Check the P2P or cloud connection status in the camera’s network settings; ensure proper port forwarding if using a static IP.
• 4Remove and re‑add the camera to the app using the QR code or manual device ID.
• 5If a firewall or ISP blocks required ports, contact the ISP or adjust firewall settings accordingly.

Follow these steps to resolve the issue:

• 1Clean the camera lens dome with a soft microfiber cloth; dust can reduce IR illumination.
• 2Verify that the IR cut filter switches automatically at dusk/dawn; if it stays in the cut position, replace the filter.
• 3Check that the IR LEDs on the 360 camera are lit; test with a flashlight to see if the LEDs are functioning.
• 4Re‑orient the camera to avoid direct IR reflection from walls or ceilings.
• 5If the IR LEDs are physically damaged or non‑functional, replace the camera unit.