Professional Hikvision WiFi Camera – Your #1 Choice in Delhi NCR

Impact by Honeywell 5MP White Plastic AHD IR Dome Camera, I-HADC-5005PI-L

Wbox 5MP 3.6mm Plastic Fixed Lens AHD IR Dome Camera, WBC0ECVHD5R2FPN

Hikvision 2MP PIR Analog Dome Camera, DS-2CE5AD0T-PIR

D-Link 2MP 3.6mm Plastic Full HD 1080p Day & Night Fixed Dome Camera, IR: 20 m, DCS-F1612

Securus 3MP 2304x1296p Aluminium & ABS Dome Camera, SS-NC15DXLP-CSUTL-M3(S)

Godrej SeeThru 2MP HD Infrared CCTV Camera, GODREJ2MP1DOME

Follow these steps to resolve the issue:

• 1Verify the camera’s power supply is active – the LED on the back should be green.
• 2Check the Wi‑Fi connection: ensure the camera is connected to the correct SSID and the signal strength is above 3 bars.
• 3Confirm the camera firmware is up‑to‑date via the manufacturer’s app or web interface.
• 4On the monitor, switch to the correct input source (HDMI/AV) that receives the camera stream.
• 5If the camera is part of a NVR system, ensure the NVR channel is set to the camera’s IP and the correct video format (H.264/H.265).

Follow these steps to resolve the issue:

• 1Open the NVR’s storage menu and check HDD health; look for any error codes.
• 2Review the recording schedule – it should be set to 24/7 or motion‑triggered for CCTV cameras.
• 3Confirm the HDD has sufficient free space (at least 10% of total capacity).
• 4Adjust motion‑detection sensitivity if recordings are missed during activity.
• 5If the HDD is corrupted, back up any recoverable data, then format the drive and re‑initialize the recording settings.

Follow these steps to resolve the issue:

• 1Ensure the mobile app (Hik‑Connect/DMSS) is updated to the latest version.
• 2Test the camera’s internet connectivity on the router – a simple ping to its IP should succeed.
• 3Check the device’s P2P/cloud connection status in the network settings; enable it if disabled.
• 4Remove the camera from the app and re‑add it using the QR code or manual entry.
• 5If using static IP or port forwarding, contact the ISP to confirm the port is open and properly forwarded.

Follow these steps to resolve the issue:

• 1Clean the camera lens and IR dome with a soft microfiber cloth to remove dust.
• 2Verify the IR cut filter toggles correctly at dusk/dawn (most Wi‑Fi cameras auto‑switch).
• 3Check the IR LED status – they should glow when the camera is in night mode.
• 4Adjust the camera angle to avoid reflecting IR light off walls or ceilings.
• 5If the IR LEDs are physically damaged or not glowing, replace the camera with a model that has functional infrared illumination.