Professional Electric Lock Installation – Your #1 Choice in Delhi NCR

Hikvision 4K Dome Camera

Dahua 2MP Bullet Camera

CP Plus 16CH NVR

Follow these steps to resolve the issue:

• 1Verify mains supply voltage at the lock location using a multimeter.
• 2Check the fuse or circuit breaker that supplies the lock circuit for tripping.
• 3Inspect the power cable and connector for breaks, corrosion, or loose connections.
• 4Confirm the lock’s internal battery backup (if applicable) is fully charged.
• 5Replace the power adapter or cable if damage is detected.

Follow these steps to resolve the issue:

• 1Ensure the lock’s Wi‑Fi or Zigbee module is powered on and within range.
• 2Verify that the router’s SSID and password match the lock’s configuration settings.
• 3Check for MAC address filtering or firewall rules blocking the lock’s IP.
• 4Reboot the lock and the central controller to refresh network handshakes.
• 5If still unresponsive, perform a factory reset of the lock and re‑program the credentials.

Follow these steps to resolve the issue:

• 1Confirm the user credentials (PIN, RFID tag) are correctly entered and registered.
• 2Test the lock with a different credential to isolate user‑specific issues.
• 3Check the lock’s firmware version; update if a known bug affects access logic.
• 4Verify that the lock’s internal keypad or reader is clean and free from debris.
• 5If using RFID, ensure the tag’s battery (if applicable) is functional and the antenna is intact.

Follow these steps to resolve the issue:

• 1Backup current lock configuration before initiating the update.
• 2Use the official manufacturer app or console to download the latest firmware; verify checksum.
• 3Connect the lock via USB or network and execute the update in low‑power mode.
• 4After update, reboot the lock and run a diagnostic test from the app.
• 5If the lock remains unstable, roll back to the previous firmware version and contact support.