Professional Number Plate Recognition – Your #1 Choice in Delhi NCR

Cybernautt CNI-B5M4LVFMP 5MP HD Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Cybernautt CNI-B5M4LVFME 5MP HD Metal Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

TP-Link VIGI C540S 4MP Outdoor Network IP Camera with ColourPro Night Vision PT, Human & Vehicle Detect, NVR Enable, Face Recognition & 2 Way Audio

Cybernautt CNI-D4M4LVFPE 4MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Hanutech 5MP Super HD Outdoor Bullet Network IP Camera with 40 Meters IR, Night Vision, IP66 Weatherproof, 5X Motorized Optical Varifocal Zoom, NVR Enabled

Cybernautt CNI-D3M4LVFPE 3MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Follow these steps to resolve the issue:

• 1Check the power supply to the camera; LED indicator should be steady.
• 2Verify BNC/RJ45 cable connections at both camera and DVR/NVR; look for visible damage.
• 3Test the camera on a known‑working channel or different DVR to isolate the unit.
• 4Confirm the camera’s video format (AHD/TVI/CVI) matches the DVR/NVR input settings.
• 5Replace the cable if the signal test shows low voltage or intermittent loss.

Follow these steps to resolve the issue:

• 1Open the DVR menu → Storage Management and check HDD health; look for SMART errors.
• 2Verify that the recording schedule is set to 24/7 or to a motion‑based trigger that includes the parking area.
• 3Ensure HDD has sufficient free space (>10% minimum) and that the disk is not full of old footage.
• 4Check motion detection sensitivity; too low a threshold can miss vehicles, too high can flood storage.
• 5If the HDD is corrupted, re‑initialize it (note: all existing data will be lost).

Follow these steps to resolve the issue:

• 1Ensure the mobile app (Hik‑Connect/DMSS) is updated to the latest version; older builds may block new camera firmware.
• 2Verify the DVR/NVR is connected to the internet (ping test from a device on the same LAN).
• 3Check the P2P/cloud connection status in the device network settings; enable if disabled.
• 4Remove and re‑add the device to the app using the QR code or manual entry to refresh credentials.
• 5If using a static IP, confirm port forwarding on the router matches the DVR’s external port configuration.

Follow these steps to resolve the issue:

• 1Clean the camera lens dome with a soft microfiber cloth; dirt or dust can block IR illumination.
• 2Verify the IR cut filter switches at dusk/dawn; if it stays in the “day” mode, reset the camera settings.
• 3Check that IR illuminator LEDs are lit; replace if any LED is dim or off.
• 4Adjust camera angle to avoid IR reflection from walls or glass surfaces.
• 5Replace the camera if the IR LEDs are physically damaged or the camera module is faulty.