Professional Boundary Wall Security – Your #1 Choice in Delhi NCR

Cybernautt CNI-B5M4LVFMP 5MP HD Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Cybernautt CNI-B5M4LVFME 5MP HD Metal Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

TP-Link VIGI C540S 4MP Outdoor Network IP Camera with ColourPro Night Vision PT, Human & Vehicle Detect, NVR Enable, Face Recognition & 2 Way Audio

Cybernautt CNI-D4M4LVFPE 4MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Hanutech 5MP Super HD Outdoor Bullet Network IP Camera with 40 Meters IR, Night Vision, IP66 Weatherproof, 5X Motorized Optical Varifocal Zoom, NVR Enabled

Cybernautt CNI-D3M4LVFPE 3MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Follow these steps to resolve the issue:

• 1Verify the camera’s power supply – LED indicator should be steady.
• 2Check the cable run along the wall: ensure BNC or RJ45 connectors are seated and not kinked.
• 3Test the camera on a separate, known‑working channel to rule out camera failure.
• 4Confirm the DVR/NVR channel settings match the camera’s video format (AHD/TVI/CVI).
• 5If the signal test shows low voltage, replace the cable or repair the connector.

Follow these steps to resolve the issue:

• 1Navigate to Storage Management in the DVR menu and check HDD health.
• 2Ensure the recording schedule is set to 24/7 or to motion‑based for the wall‑mounted cameras.
• 3Verify that the HDD has more than 10% free space; if not, delete old footage or add another drive.
• 4Check motion detection sensitivity and adjust if it is set too low for the wall environment.
• 5If HDD errors appear, re‑initialize the drive (note: data loss will occur).

Follow these steps to resolve the issue:

• 1Update the mobile app (Hik‑Connect/DMSS) to the latest version.
• 2Ping the DVR/NVR IP from a laptop to confirm internet connectivity.
• 3Check the P2P/cloud connection status in the device network settings; enable if disabled.
• 4Remove and re‑add the device in the app using the QR code or manual entry.
• 5If a static IP is used, ensure port forwarding is configured correctly on the ISP router.

Follow these steps to resolve the issue:

• 1Clean the camera lens dome with a soft microfiber cloth to remove dust.
• 2Confirm the IR cut filter toggles automatically at dusk/dawn; manually switch if necessary.
• 3Inspect IR illuminator LEDs for continuity; replace if any LED is non‑functional.
• 4Reposition the camera to avoid glare from surrounding walls or street lights.
• 5If LEDs are physically damaged, replace the camera module.