Professional Automatic Gate System – Your #1 Choice in Delhi NCR

Cybernautt CNI-B5M4LVFMP 5MP HD Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Cybernautt CNI-B5M4LVFME 5MP HD Metal Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

TP-Link VIGI C540S 4MP Outdoor Network IP Camera with ColourPro Night Vision PT, Human & Vehicle Detect, NVR Enable, Face Recognition & 2 Way Audio

Cybernautt CNI-D4M4LVFPE 4MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Hanutech 5MP Super HD Outdoor Bullet Network IP Camera with 40 Meters IR, Night Vision, IP66 Weatherproof, 5X Motorized Optical Varifocal Zoom, NVR Enabled

Cybernautt CNI-D3M4LVFPE 3MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Follow these steps to resolve the issue:

• 1Verify that the camera power LED is green; replace the power source if it’s red or off.
• 2Check the BNC/RJ45 cable termination at both the camera and the DVR/NVR.
• 3Test the camera on a separate channel or another monitor to confirm video signal integrity.
• 4Confirm the DVR/NVR channel settings are set to the correct video format (AHD/TVI/CVI) for the installed camera.
• 5If the signal test shows low voltage, replace the cable or use a signal amplifier.

Follow these steps to resolve the issue:

• 1Open the DVR/NVR menu and navigate to Storage Management – check HDD health status and free space.
• 2Ensure the recording schedule is set to 24/7 or to motion‑based triggering for the gate camera.
• 3Verify that motion detection sensitivity is enabled on the gate camera channel.
• 4Re‑initialize the HDD if corrupted (note: this will erase existing footage).
• 5Check that the gate‑control software is not blocking recording by reviewing system logs.

Follow these steps to resolve the issue:

• 1Update the mobile app (Hik‑Connect/DMSS) to the latest version available on the store.
• 2Ping the DVR/NVR from a mobile device to confirm internet connectivity.
• 3Check the P2P/cloud connection status in the device network settings and ensure port forwarding is set if using a static IP.
• 4Remove and re‑add the device to the app using the QR code scan feature.
• 5If the issue persists, contact the ISP to verify that the required ports (e.g., 8000, 8001) are open.

Follow these steps to resolve the issue:

• 1Clean the camera lens dome with a soft microfiber cloth to remove dust or smudges.
• 2Confirm that the IR cut filter switches automatically at dusk/dawn by observing the camera’s LED indicator.
• 3Verify that the IR illuminator LEDs are lit; replace them if they are dim or non‑functional.
• 4Adjust the camera angle to avoid IR reflection from nearby walls or glass surfaces.
• 5If the IR LEDs are physically damaged, replace the camera with a new IR‑enabled unit.