Professional WiFi Video Doorbell – Your #1 Choice in Delhi NCR

Cybernautt CNI-B5M4LVFMP 5MP HD Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Cybernautt CNI-B5M4LVFME 5MP HD Metal Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

TP-Link VIGI C540S 4MP Outdoor Network IP Camera with ColourPro Night Vision PT, Human & Vehicle Detect, NVR Enable, Face Recognition & 2 Way Audio

Cybernautt CNI-D4M4LVFPE 4MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Hanutech 5MP Super HD Outdoor Bullet Network IP Camera with 40 Meters IR, Night Vision, IP66 Weatherproof, 5X Motorized Optical Varifocal Zoom, NVR Enabled

Cybernautt CNI-D3M4LVFPE 3MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Follow these steps to resolve the issue:

• 1Check power supply to the doorbell camera (LED indicator should be steady).
• 2Verify the WiFi signal strength at the doorbell location – use a WiFi analyzer app to ensure >30 dBm.
• 3Confirm that the doorbell firmware is up‑to‑date via the manufacturer’s app.
• 4Test the camera by viewing it directly on a smartphone; if it works, the issue is with the external monitor.
• 5Check the configuration of the video output mode (RTSP/HTTP) in the camera settings.

Follow these steps to resolve the issue:

• 1Check the storage health status in the device menu → Storage Management.
• 2Verify that the recording schedule is set to 24/7 or to motion‑based events.
• 3Ensure the storage has sufficient free space (>10% minimum).
• 4Review motion detection sensitivity settings; too low sensitivity may miss events.
• 5If the HDD is corrupted, re‑initialize it (note: this will erase existing data).

Follow these steps to resolve the issue:

• 1Ensure the mobile app (e.g., Hik-Connect, DMSS, or manufacturer‑specific app) is updated to the latest version.
• 2Verify that the doorbell is connected to the internet (check WiFi icon and signal strength).
• 3Check the P2P/cloud connection status in the device network settings.
• 4Re‑add the device to the app using the QR code or manual IP entry if needed.
• 5If using a static IP, confirm port forwarding is correctly configured on the ISP router.

Follow these steps to resolve the issue:

• 1Clean the camera lens dome with a soft microfiber cloth.
• 2Check that the IR cut filter switches off automatically at dusk/dawn (verify in camera settings).
• 3Verify that the IR LEDs are illuminated; test with a flashlight to spot any dead LEDs.
• 4Adjust the camera angle to avoid IR reflection off nearby walls or windows.
• 5If IR LEDs are physically damaged, replace the camera module.