Professional Godrej Video Door Phone – Your #1 Choice in Delhi NCR

Cybernautt CNI-B5M4LVFMP 5MP HD Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Cybernautt CNI-B5M4LVFME 5MP HD Metal Bullet Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

TP-Link VIGI C540S 4MP Outdoor Network IP Camera with ColourPro Night Vision PT, Human & Vehicle Detect, NVR Enable, Face Recognition & 2 Way Audio

Cybernautt CNI-D4M4LVFPE 4MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Hanutech 5MP Super HD Outdoor Bullet Network IP Camera with 40 Meters IR, Night Vision, IP66 Weatherproof, 5X Motorized Optical Varifocal Zoom, NVR Enabled

Cybernautt CNI-D3M4LVFPE 3MP HD Dome Network IP Camera with Colour Night Vision, Human Detect, Motion Detect, Audio & NVR Enabled

Follow these steps to resolve the issue:

• 1Check power supply to the Godrej camera (LED indicator should be steady).
• 2Verify BNC/RJ45 cable connections at both the camera and the DVR/NVR.
• 3Test the camera independently on a known‑working channel using a spare monitor.
• 4Check DVR channel settings to ensure the correct video format (AHD/TVI/CVI) is selected.
• 5Replace the cable if the signal test shows low voltage or intermittent connectivity.

Follow these steps to resolve the issue:

• 1Check HDD health status in the DVR menu → Storage Management.
• 2Verify that the recording schedule is set to 24/7 or to motion‑based triggers.
• 3Ensure the HDD has sufficient free space (>10% minimum).
• 4Check motion detection sensitivity settings on the Godrej camera.
• 5Re‑initialize the HDD if it is corrupted (note: data loss may occur).

Follow these steps to resolve the issue:

• 1Ensure the mobile app (Hik‑Connect/DMSS) is updated to the latest version.
• 2Verify that the DVR/NVR is connected to the Internet (ping test or router status).
• 3Check P2P/cloud connection status in the device network settings.
• 4Re‑add the device to the app using the QR‑code scan feature.
• 5Contact the ISP if port forwarding is required for static IP setup.

Follow these steps to resolve the issue:

• 1Clean the camera lens dome with a soft microfiber cloth.
• 2Check the IR cut filter operation – it should switch automatically at dusk/dawn.
• 3Verify that the IR illuminator LEDs are functioning.
• 4Adjust the camera position to avoid IR reflection from walls or ceilings.
• 5Replace the camera if the IR LEDs are physically damaged.